Draft PathArray/ru

Other languages:
CircularArray
PathLinkArray
Draft

Draft PathArray

Расположение в меню
Черчение → Массив по направляющей
Верстаки
Draft, Arch
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Массив

Description

The Draft PathArray command creates a regular array from a selected object by placing copies along a path. Use the Draft PathLinkArray command to create a more efficient Link array instead. Except for the type of array that is created, Link array or regular array, the Draft PathLinkArray command is identical to this command.

Both commands can be used on 2D objects created with the Draft Workbench or Sketcher Workbench, but also on many 3D objects such as those created with the Part Workbench, PartDesign Workbench or BIM Workbench.

Draft PathArray

Usage

  1. Select the object you wish to array.
  2. Add the path object to the selection. It is also possible to select edges instead. The edges must belong to the same object and they must be connected.
  3. There are several ways to invoke the command:
    • Press the Path array button.
    • Draft: Select the Modification → Array tools → Path array option from the menu.
    • BIM: Select the Modify → Path array option from the menu.
  4. The array is created.
  5. Optionally change the properties of the array in the Property editor.

Alignment

The alignment of the elements in a Draft PathArray depends on the properties of the array and the orientation of the source object. The position of the source object is ignored: for the purpose of the array the x, y and z are set to 0. If the ДанныеAlign property of the array is set to false the orientation of the array elements is identical to that of the source object. If it is set to true the X axis of the local coordinate system of each element placement is tangent to the path. The Y and Z axes of the local coordinate systems depend on the ДанныеAlign Mode property of the array. Other array properties involved in the alignment include ДанныеTangent Vector, ДанныеForce Vertical and ДанныеVertical Vector.

3 arrays based on the same non-planar path. From left to right: Align is false, Align is true with Align Mode Original and Align is true with Align Mode Frenet

.

Align Mode

Three modes are available:

Original

This mode comes closest to the single ДанныеAlign Mode available in version 0.18. It relies on a fixed normal vector. If the path is planar this vector is perpendicular to the plane of the path, else a default vector, the positive Z axis, is used. From this normal vector and the local tangent vector (the local X axis) a cross product is calculated. This new vector is used as the local Z axis. The orientation of the local Y axis is determined from the local X and Z axes.

Frenet

This mode uses the local normal vector derived from the path at each element placement. If this vector cannot be determined (for example in the case of a straight segment) a default vector, again the positive Z axis, is used instead. With this vector and the local tangent vector the local coordinate system is determined using the same procedure as in the previous paragraph.

Tangent

This mode is similar to ДанныеAlign Mode Original but includes the possibility to pre-rotate the source object by specifying a ДанныеTangent Vector.

Force Vertical and Vertical Vector

These properties are only available if ДанныеAlign Mode is Original or Tangent. If ДанныеForce Vertical is set to true the local coordinate system is calculated in a different manner. The ДанныеVertical Vector is used as a fixed normal vector. From this normal vector and the local tangent vector (the local X axis) again a cross product is calculated. But now this vector is used as the local Y axis. The orientation of the local Z axis is determined from the local X and Y axes.

Using these properties can be required if one of the edged of the path is (almost) parallel to the default normal of the path.

Properties

See also: Property editor.

A Draft PathArray object is derived from a Part Feature object and inherits all its properties (with the exception of some View properties that are not inherited by Link arrays). The following properties are additional unless otherwise stated:

Data

Link

The properties in this group are only available for Link arrays. See Std LinkMake for more information.

Alignment

Objects

View

Link

The properties in this group, with the exception of the inherited property, are only available for Link arrays. See Std LinkMake for more information.

Base

The properties in this group, with the exception of the inherited property, are only available for Link arrays. See Std LinkMake for more information.

Display Options

The properties in this group are inherited properties. See Part Feature for more information.

Draft

Object style

The properties in this group are not inherited by Link arrays.

Scripting

See also: Autogenerated API documentation and FreeCAD Scripting Basics.

To create a path array use the make_path_array method (introduced in version 0.19) of the Draft module. This method replaces the deprecated makePathArray method. 

path_array = make_path_array(base_object, path_object,
                             count=4, extra=App.Vector(0, 0, 0), subelements=None,
                             align=False, align_mode="Original", tan_vector=App.Vector(1, 0, 0),
                             force_vertical=False, vertical_vector=App.Vector(0, 0, 1),
                             use_link=True)

Example: 

import FreeCAD as App
import Draft

doc = App.newDocument()

p1 = App.Vector(500, -1000, 0)
p2 = App.Vector(1500, 1000, 0)
p3 = App.Vector(3000, 500, 0)
p4 = App.Vector(4500, 100, 0)
spline = Draft.make_bspline([p1, p2, p3, p4])
obj = Draft.make_polygon(3, 500)

path_array = Draft.make_path_array(obj, spline, 6)
doc.recompute()

wire = Draft.make_wire([p1, -p2, -p3, -p4])
path_array2 = Draft.make_path_array(obj, wire, count=3, extra=App.Vector(0, -500, 0), subelements=["Edge2", "Edge3"], align=True, force_vertical=True)
doc.recompute()


CircularArray
PathLinkArray
Draft
Draft
Документация пользователя